Atlantic line spool 8 ton / 100 m
The Atlantic line spool 8 ton 100 m is equipped with the strongest and longest of our lines. This model is completely unique on the Finnish and European markets!
It is intended for somewhat larger boats weighing up to approx. 13-15 tons.
The line tensile strength is 8 tons. The loop stitches reduce the durability somewhat, but lifting a boat is not the same as mooring or anchoring.
The same anchoring rules apply, the basic rule being that the anchor line length must be equal to 3-4 times the depth. Anchoring depth is somewhere around 25 m. The 8-ton line is also convenient to handle owing to its thickness. In your arms, it twists in a soft rope-like manner.
Note that the tensile strength required for mooring and anchoring is completely case-specific and at the discretion of the user. The decision is up to the captain!
Since the spool is made of stainless steel, it retains its original shiny and clean appearance year after year. The spool is made of sturdy materials: The round body wire is 10 mm and intermediate wires 8 mm!
This means that the spool is the strongest one on the market!
In the course of welding, the thermal energy always causes deformations and distortions of the material. Atlantic spools are hand-straightened after welding.
The welding operations are carried out by experienced professionals.
An important feature is the guide ensuring zero twists on the spool – otherwise the line would no longer fit on the spool (see the video on our website). The turning knob is not merely a knob – it is a fixed handle of the size of a man’s hand made of weather-resistant plastic. The friction brake is located at the centre of the spool, on the face side (designated by the sticker); the rolling friction can be adjusted using a 24 mm wrench. The friction is optimal if the spool stops on its own after pulling of the line is finished.
It is intended for somewhat larger boats weighing up to approx. 13-15 tons.
The line tensile strength is 8 tons. The loop stitches reduce the durability somewhat, but lifting a boat is not the same as mooring or anchoring.
The same anchoring rules apply, the basic rule being that the anchor line length must be equal to 3-4 times the depth. Anchoring depth is somewhere around 25 m. The 8-ton line is also convenient to handle owing to its thickness. In your arms, it twists in a soft rope-like manner.
Note that the tensile strength required for mooring and anchoring is completely case-specific and at the discretion of the user. The decision is up to the captain!
Since the spool is made of stainless steel, it retains its original shiny and clean appearance year after year. The spool is made of sturdy materials: The round body wire is 10 mm and intermediate wires 8 mm!
This means that the spool is the strongest one on the market!
In the course of welding, the thermal energy always causes deformations and distortions of the material. Atlantic spools are hand-straightened after welding.
The welding operations are carried out by experienced professionals.
An important feature is the guide ensuring zero twists on the spool – otherwise the line would no longer fit on the spool (see the video on our website). The turning knob is not merely a knob – it is a fixed handle of the size of a man’s hand made of weather-resistant plastic. The friction brake is located at the centre of the spool, on the face side (designated by the sticker); the rolling friction can be adjusted using a 24 mm wrench. The friction is optimal if the spool stops on its own after pulling of the line is finished.
The spool needs to be firmly attached. It is intended for installation to a railing crossing, railing pipe diameter 22-30. The thicker the stronger! The bracket includes 10 mm acid-resistant screws (6 pc.).
The spool should be installed on the inside of the railing along the boat sides (consider the other boats at the marina) and on the outside of the railing at the bow or stern. The installation locations are case-specific.
If the line is constantly pulled at angles exceeding 15 degrees with respect to the guide, use the optional guide for free angles attachable to the railing. This keeps the spool’s own guide intact even in case of heavy use.
- Spool diameter 720 mm
- Spool weight (incl. Line) 25 kg
- Line space width 85 mm
- Line width 80 mm
- Length 100 m. With a reinforced loop at the end.
Available only directly from us, not from resellers.
Price: 701,86 €
Order>>
Look other line spool models